PVTECHNIC MODEL: SA3TTT YEAR: 1998

• 3 HEAD WELDER
• Transom-Transom-Transom
• Best combination of heads
• You can weld two sashes back to back
• We are currently reconditioning this machine
• Good condition

ELUMATIC CORNER CLEANER

• 2x manual toggle clamps
• NOTE: We can add pneumatic clamps instead of manual
• Good condition
• Single phase

GRAULE MODEL: AKF 4/200

• Heavy duty 90 degree end miller
• Good condition
• Manual push through
• 1x pneumatic top clamp
• 1x pneumatic side clamp
• Brake on the motor
• Three phase

JADE MODEL: TG3000 YEAR: 2003

• Transom Groover 4 knives
• Pristine condition
• Pneumatic self centering
• Pneumatic grooving
• Select switch to turn bottom grooving knives off
• for Woodgrain on White
• Air only

URBAN MODEL: SW300/2 YEAR: 1987

• Corner cleaner feature groover
• Good condition
• Automatic self centering
• WIll take 2x gangs of cutters
• Three phase

CAG GROOVER FOR CORNER & TRANSOM

• Single knife
• Good condition
• Air only

URBAN MODEL: AKS3510 YEAR: 1982

• Single head corner welder
• Good condition
• Variable angle
• Single phase

PERTICI DOUBLE MITRE SAW

• 3.2m maximum cutting length
• Approximately 10-12 years old
• Good condition
• With 2x blades and 1x intermediate profile support
• Three phase

• MODEL: SA2BT
• Corner transom
• Approximately 10 years old
• In good working order
• All valves have been replaced for brand new ones
• Three phase

URBAN SIDE BE SIDE WELDER

• Corner transom
• Only corner welding side working
• Single phase

ELUMATIC MANUAL ENDMILLER

• 90 degree end milling
• Manual front clamp
• Good condition
• Single phase.

LILLYPUT/PERTICI MANUAL ENDMILLER

• 90 degree end milling
• Manual front clamp
• Good condition
• Single phase.

URBAN FOUR KNIFE TRANSOM GROOVER

• With 4mm width grooving knives
• In fair condition
• Self centring can be achieved by moving over the right head
• Pneumatic clamps
• Air operation only.

• 2x Pneumatic clamping
• single phase power
• in good working order.

• For corner grooving
• Model: PL12
• Air operated only
• in good condition.

• MODEL: SA1P
• This machine will do, believe it or not, 2 corners at the same time, transom and crucifix welds, reverse butt welds, variable angle welds and cill at 180mm at 45 degrees due to an elongated welding plate on one side.
• Single phase power
• In good condition.

• MODEL: FC300
• Including blade
• 2x Front pneumatic clamps
• Can be sold with or without clamps
• Single phase
• In reasonable condition.

BARRY IRONS CORNER CLEANER

• With 2x pneumatic top clamps.
• Manual push through.
• Single phase.

• Air operated via foot peddle
• Another one available further down the page

JADE ENGINEERING WRR-UNIMATIC NIBBLER

• Prevents PVCU & gasket weld sprue 'hard spots' at corner/transom joints.
• 2x available for sale.
• Good condition.
• Air operated only.

JADE ENGINEERING LITTLE JEM 80 (Year 2002)

• Can be used for overscribe bead miller or end miller.
• Good condition.
• No tooling included.
• 3 phase power.

URBAN SINGLE HEAD TRANSOM WELDER

• Model AKS3705 (Year 1988)
• Good condition.
• Single phase power.

• Air operated via foot peddle