Home Refurbished Machinery
Refurbished uPVC and Aluminium Window Fabrication Machinery

 

Machines Due in / Instock but Not Finished and will be avaliable shortly:

 

 

 
 

All Machines After this Line Have Unfortunatly Already Been Sold !

 
 
Elumatec WSF76/05 3 Head Aluminium Drainage Router Print
(Click to Enlarge)
      

     

  • Elumatec WSF76/05 3 Head Aluminium Drainage Router
  • 3 Phase Power
  • Very Heavy Duty
  • Automatic Routing
  • Variable Angle on top and front head, Back head fixed
  • In Fantastic Condition
  • Hardly Been used
  • Year 2005 
 


 
MLA A21 Copy Routers Single Phase Print

(Click to Enlarge)


         

     

MLA A21 Single Head Copy Routers 

X2 of These Machines Available both the same spec

Single Phase Power (13 Amp Plug)

Pneumatic Mist Spray fitted to both for Aluminium 

 

Make MLA

Model A21

Year 1999

 

Both in the same Very good Condition with:

  • New Spindle Bearing
  • New 8mm Collet
  • New Copy Plate
  • New Airlines
  • New Router Cutter
  • New Clamping Feet
  • New Back Fences + Support

Plus lots of new peices in General
 
FOM BAIHA Crimping Machine Print
(Click to Enlarge)
      

 

      

     

  • FOM Baiha Crimping Machine
  • In Fantastic Condition
  • Hardly Been used
  • Year 2006
 
Barry Irons Corner Cleaner Single Phase Print

Barry Irons Corner Cleaner

 

  • Barry Irons Corner Cleaner
  • x2 Pneumatic Clamps
  • Old But In Good Condition
  • Single Phase

 

 
 
Kombimatic Model AP355 Bench Mounted Corner Miller Print
(Click to Enlarge)
      

    

 

  • Kombimatic Model AP355 Corner Cleaner
  • x2 Pneumatic Clamps
  • Bench Mounted
  • Year 1998
  • In good Condition
  • Single Phase Power
  • Air Supply Required

 

 
 
MLA A21 Single Head Copy Router for Aluminium or UPVC Print
(Click to Enlarge)
          

     

Model MLA A21 Single Head Copy Router for Aluminium or UPVC  3 Phase

With The Following new parts fitted to this machine:

  • Kip Lock Handles
  • Two PNeumatic Front Clamps + Clamping Feet
  • Pressure Safety Switch
  • Copy Plate with holes, barrells etc.
  • Copy Plate Blank
  • Clamp Flow Regualtors
  • On off Switch for the Clamps
  • Cutter 8x30x100x8C Twin Fluted
  • Bottle + Holder for Mist Cutting Fluid
  • Two Stylus Blocks 5,6,8 and 10mm
  • Air Pipe and Fitting
  • Blowgun + Curley Pipe
  • Back to front Stops
  • In Good Condition
  • Year 2000
  • 3 Phase Power and Air Supply Required

 
 
Single Sided Bench Mounted Groover Print
(Click to Enlarge)
      

    

 

  • Single Sided Bench mounted groover
  • Resharpened Knife
  • Foot Pedal Operated
  • Bench Mounted
  • 6 Bar Air Supply Required

 

 

 
 
Pertici VC721 Semi Automatic Vee Cut Saw Print
(Click to Enlarge)
      

    

 

  • Pertici VC721 Semi Automatic Vee Cut Saw
  • Pneumatic Cutting
  • Two Hand Control
  • x2 New 250mm Dia Blades fitted
  • New Airline Pipe
  • With two metre measuring device + leg + tape ( Not shown in pictures)
  • 3 Phase Power
  • In good condition
  • Year 1996

 

 

 
 
Pertici Model FC105 Single Head Copy Router Print

(Click to Enlarge)
  

  • Pertici Model FC105 Single Head Copy Router

  • 3 Phase Power

  • Fitted with Mist Spray for Aluminium

  • In Good Condition

  • Year 1996
 
Jade TG3 Transome Groover Print
(Click to Enlarge)
  • Jade engineering model TG3 transome groover
  • Pneumatic clamping
  • Pneumatic grooving
  • Pneumatic self centering
  • Selection switch to turn off bottom grooving knives for wood grain on white grooving
  • In excellent condition
  • Air only required
  • Year 2002
 
Little Mac Jade Engineering Print
(Click to Enlarge)
      

     

  • Jade Engineering Little Mac
  • Air Only
  • Year 2005
  • In Very Good Condition

 

Technical Info Sheet

 
 
MLA WS31 3 Head Drainage Router Print
(Click to Enlarge)
      

    

 

  • Model MLA WS31 3 Head Drain Slot Machine with top head variable angle
  • x3 New Cutters
  •  All Three Motors are Air motor, Air Supply Only needed no electricity supply required  
  • x2 Bars + x2 Flip Stops
  • Year 2004
  • In Very Good Condition

 

 
 
Saltech Single Head Corner Welder Variable Angle Print
(Click to Enlarge)
      
  • Saltech Single Head Corner Welder
  • Variable Angle Welding
  • Butt Welding
  • Support Arms
  • 2 Hand Control 
  • 240V and Air Supply Required 
  • Machine in Good Condition
 
MLA A24 Copy Router with Espag Print
(Click to Enlarge)
      

    

 

  • Model MLA A24 Copy Router Single Head + Espag with Self Centering bars + Paddles
  • 4 Flip stops + Extra bars
  • 3 Phase Power 
  • Year 2001
  • In Very Good Condition

Mist Spray can be fitted to the machine for aluminium if required at extra cost.

 

 
 
MLA M8 Manual Push Through End Miller Print
(Click to Enlarge)
      

      

 

  • MLA M8 Manual Push Through End Miller with Variable angle back and front fence for angles
  • x2 Pneumatic Top Clamps
  • x6 Setting Depth Turret Stop
  • Pneumatic Mist Spray fitted for Aluminium
  • Half Moon Support for Aluminium
  • Quick Release manual cutter change system
  • Two Button Safety hand control  C.E Marked
  • 3 Phase Power
  • Year 2012
  • In Fantastic Condition as NEW

(Please Note Cutter Shown not Included with Machine, Cutters Sold Separately)

 

 

 

 
 
MLA PL12 Double Corner Feature Groover Print
(Click to Enlarge)
      

     

  • MLA Model PL12 Double Corner Feature Groover
  • Air Only
  • Year 2000
  • In Very Good Condition

 

 
 
MLA A32 Two Dead Door Router Print
(Click to Enlarge)
      

      

 

  • MLA A32 Two Head Door Router with two speed selection switch for both top and back cutters
  • Pneumatic Stylus pin, with two hand control safety start
  • x4 Flip Stops
  • x1 New Cutter for top head 8x30x100x8C Twin Fluted
  • x1 New Cutter for back head 16x30x80x8C Twin Fluted
  • New Blow Gun
  • New Copy Plate
  • x2 Rubber Clamping Feet
  • Air Supply Required
  • 3 Phase Power
  • C.E Marked
  • In Fantastic Condition
  • Year 2002

 
 
MLA A24 Copy Router with Espag and Mist Spray Print
(Click to Enlarge)
      

    

 

  • Model MLA A24 Copy Router Single Head + Espag with Self Centering bars + Paddles
  • Pneumatic Mist Spray Fitted for Aluminium
  • x4 Flipstops + Extra Bars
  • 3 Phase Power 
  • Year 2004
  • In Very Good Condition

 

 
 
MLA M7G+QR+45 End Miller Print
(Click to Enlarge)
          
  • MLA M7G+QR+45 Manual Push Through End Miller
  • 90 Degree and 45 Degree Milling both sides with x2 Pneumatic Clamps
  • Manual Quick release cutter system
  • x6 Depth turret stop
  • Single Phase Power
  • With x1 Quick release sleeve
  • In Very Good Condition
  • Year 2006

 

 
 
MLA Model A10 single head copy router 240V 13 Amp Plug Print
(Click to Enlarge)
      

     

  • MLA Model A10 single head copy router 240V 13 Amp Plug
  • Pneumatic Mist Spray for Aluminium
  • x2 Pneumatic Front Clamps
  • x1 New Cutter
  • Two Hand Low Voltage safety Start
  • Blow gun
  • Tools + Instruction Manual
  • Year 2008
  • In Fantastic Condition

 

 
 
MLA A24 Single head plus Espag Drills Copy Router Print
(Click to Enlarge)
      
  • MLA A24 Single head plus Espag Drills Copy Router
  • Copy Plate
  • Pneumatic Mist Spray fitted to the machine for Aluminium
  • Two Pneumatic Front Clamps
  • Two hand Control Safety Start CE Marked
  • New Cutter on top head 8x30x100x8C Twin Fluted
  • Drills 10mm 12mm 10mm
  • Two Self Centering bars with two paddles
  • 2x Extra Bars with x4 Flip Stops
  • New Blow Gun
  • 2 New Rubber Clamping Feet
  • In Very Good Condition
  • 3 Phase Power
  • Year 2001
 
Pertici Model FC106 Single Head Copy Router with Espag Print
(Click to Enlarge)
      
  • Pertici Model FC106 Single Head Copy Router with Espag Drilling
  • Self Centering Bars + Paddle
  • A New Set of Espag Drills 10mm 12mm 10mm
  • New Blow gun
  • New Top Cutter 8x30x100 8C Twin Fluted 
  • New Clamping Feet
  • New Paddles
  • New Gas Strut
  • Year 1999
  • 3 Phase Power
  • Machine in Good Condition
 
MLA Model A10 Mini Single Head Copy Router Print
(Click to Enlarge)
      
  • MLA Model A10 Mini Single Head Copy Router
  • Pneumatic Mist Spray Fitted for Aluminium
  • Two Pneumatic front Clamps
  • Two Hand Control Start for Safety CE Marked
  • Single Phase Power 13 Amp Plug fitted
  • Year 2000
  • In good Condition
 
Elumatic Model AS170/00 Single Head Copy Router Print

(Click to Enlarge)
   
  • Elumatic AS170/00 Copy Router
  • With Pneumatic Clamps and Mist Spray for Aluminium
  • Pneumatic Sylus Pin
  • The Profile table can be lowered to three different levels to take large heights of profile
  • 3 Phase Power
  • In Fantasitc as New Condition
  • Year 2004
 
Pertici 332IP Double Mitre Saw for Aluminium or UPVC Print
(Click to Enlarge)
      

      

 

  • Pertic 332IP Double Mitre Saw for Aluminium or UPVC
  • x2 Pneumatic Top Clamps
  • x2 Pneumatic Bottom Clamps
  • x2 Pneumatic Mist Sprays for Aluminium
  • x3 Sets of Resharpened Blades + Tools Etc.
  • x1 Intermediate Profile Support
  • Oil Decent of the saw blades for cutting Aluminium
  • C.E Two Hand Safety Start
  • Many New Parts Fitted to this machine
  • In Excelent Condition
  • 3 Phase Power and Air Supply Required
  • Year 2006

 

 
 
MLA PL16 3 Gang Automatic Corner Cleaner Print
(Click to Enlarge)
   
  • MLA PL16 3 Gang Automatic Corner Cleaner Feature Groover
  • Self Centering
  • Selection Switch to turn off one knife for wood grain on white
  • x2 Support Arms
  • Capacitiy for 3 Cutter Sets
  • ThreePhase Power
  • In Excellent condition
  • Year 2005
 
Pertici ML142 3 Head Drainage Router Print
(Click to Enlarge)
      

    

 

  • Pertici ML142 Three Head Drainage Router
  • High Frequency Motors
  • x3 New Cutters
  •  Pneumatic Front Clamp
  • Two Hand Start
  • 240V Power, Normal 13 Amp Plug
  • In Excelent Condition
  • Air Supply Required
  • Year 2001

 

 
 
Jade Engineering Model Gem 80 Beading Machine Print
(Click to Enlarge)
      

    

 

  • Gem 80 Semi Automatic Beading Machine
  • With Clean the stops blow system fitted
  • Bench Mounted
  • Year 2007
  • In good Condition
  • Single Phase Power
  • Air Supply Required

 

 
 
Pertici Model ML142 Three Head Drainage Router Print
(Click to Enlarge)
   
  • Pertici Model ML142 Three head drainage router
  • Single Phase Power
  • Pneumatic clamp
  • In good condition
  • Year 1995
 
MLA Model A24 LS Copy Router Print
(Click to Enlarge)
      
  • MLA A24LS Copy Router with Espag and Long Stroke
  • 700mm left to right head travel for night vent routing
  • 2 Hand Safety Start
  • Self Centering Bars and Paddles x2 bars +4 Flip stops
  • New Top Cutter
  • x3 New Espag Drills
  • Pneumatic Mist Spray for Aluminium
  • ThreePhase Power
  • Pneumatic clamps
  • In Excellent condition
  • Year 2008
 
Pertici Model VC721 Semi-Automatic Vee Cut Saw Print
(Click to Enlarge)
     
  • Pertici VC721 Semi Automatic Vee Cut Saw
  • Pneumatic Cutting
  • x2 250mm Hss Blades
  • x2 Pneumatic Front Clamps
  • x2 Pneumatic Top Clamps
  • x1 Two Metre Manual Measuring device + support leg
  • 3 Phase Power
  • In Good Condition
  • Year 2003
 
Compa Doublematic 350V Double Mitre Saw Print
(Click to Enlarge)
   
  • Compa  Model Doublematic 350v
  • Year 2006
  • New blades 350mm dia 108 z tct neg
  • Digital display
  • Max cutting between the heads 3 meters
  • Oil feed decent to the heads
  • Two hand control
  • Two extra intermidiate pneumatic clamping devices
  • Small cutting lenth between the heads
  • Three phase power
  • For aluminium or  upvc or wood
  • In very good condition
 
Bench Mounted End Miller Print
(Click to Enlarge)
  • Bench Mounted
  • Pneumatic clamping
  • Manual Operation
  • Single Phase
  • Good Condition
 
Barry Irons Single Sided Corner Feature Groover Print

(Click to Enlarge)

  

  • Bench Mounted
  • Pneumatic Operation Via Foot Pedal
  • New Groove Knife Fitted
  • In Good Condition  
 
MLA PL13 Corner Cleaner 2006 Print

 

MLA PL13

 

 

MLA PL13 Corner Cleaner 2006 in Very good Condition

  • Feature groover
  • Automatic cycle
  • Pneumatic quick release cutter system
  • Pneumatic self centring
  • Select switch on bottom knife only
  • Three phase

 

 
 
Graule ZS170N Cross Cut Saw Alu Spec Print

(Click to Enlarge)

        

  • Graule ZS170N Cross Cut Saw Alu Spec
  • Pneumatic Clamps
  • Stand
  • Mist Spray
  • Hydro-check Oil Damper
  • New Blade
  • Many New parts fitted including complete new table and front Guard
  • Three Phase and Air required
  • Very Good Condition

  

 Click for Machine Spec

 
 
Graule ZS170N Cross Cut Saw Print

(Click to Enlarge)

       

 

  

  • Graule ZS170N Cross Cut Saw Alu Spec
  • Pneumatic Clamps
  • Stand
  • Mist Spray
  • Hydro-check Oil Damper
  • Many New parts fitted including complete new table and front Guard
  • Three Phase and Air required
  • Very Good Condition

  

 Click for Machine Spec

 
 
Infismac FC5 2 Head Door Router for Aluminium or PVC Print

(Click to Enlarge)

        

 

  • Infismac Model FC5 Door Router Two Head for aluminium or upvc
  • With two pneumatic front clamps
  • Mist sprays
  • Two hand safety start
  • Two new router cutters
  • Three new gas struts fitted
  • In very good condition
  • Three phase power and air  required
 
Saltech Single Head Corner Welder Print

 

 

Click to enlarge:

    

 

 

  • Saltech Single Head Corner welder 2007
  • Variable Angle
  • Good for Large Cills and reverse butt welding
  • 4th Corner switch for small frames
  • Looks as new in VERY good condition
  • Support Arms
  • Single phase and air required
 
Barry Irons Corner Cleaner Print

Bi Trip Corner Cleaner

 

  • Barry Irons Corner Cleaner
  • x2 Pneumatic Clamps
  • Old But In Good Condition
  • 3 Phase
 
Three Head Automatic Drainage Router Print

(Click to Enlarge)

        

 

  • 3 Head Automatic Drainage machine
  • Air Motors
  • Two Front Pneumatic Clamps
  • 3 New Cutters Fitted
  • Only Air Supply Required to run this Machine
  • In Good condition 
 
TOP & BOTTOM CORNER FEATURE GROOVER Ref: ANT-SH-001 Print

  • TOP AND BOTTOM CORNER FEATURE GROOVER
  • Air operated via foot peddle

 
URBAN SV320 Corner Cleaner 3 Cutter Capacity +Drills Print


  • URBAN SV320 Corner Cleaning Machine 1998
  • 3 Cutter Set Capacity on one Spindle
  • Top and Bottom Grooving
  • Top and Bottom Drills
  • Top and bottom hook Knives
  • All Cleaning Functions Manually selectable via front control panel
  • Wide front Support Arm (Not Pictured)
  • Auto-Matic Cycle
  • PLC Controlled but manual Configuration / Setting
  • Three Phase Power and 6 Bar Air Supply Required
  • Very Good condition

 

Click for machine Spec
 
Windmill Bench Mounted End Miller Print

(Click to Enlarge)  

  • Bench Mounted
  • Manual Operation
  • 90 Degree Milling
  • Single Phase
 
Pertici ML142 2 Head Water Slot Machine Print

(Click to Enlarge)

       

 

  • 2 Head Drain Slot Machine (Top and Bottom heads)
  • Good condition
  • Pneumatic Clamp
  • Free Standing
  • 240 Volt Motors
  • Solid construction
  • Single Phase Power and Air Supply Required

  

 Click for Machine Spec

 
 
ELU KS101 V Notch Saw Print

(Click to Enlarge)

  

  • Three Phase
  • Like New Condition
  • Fitted with resharpened Blades
  • 2 Hand Control
  • Horizontal and Vertical Pneumatic Clamps
  • All New Electric Control Gear
  • All New Pneumatic Controls
  • Fully Repainted and serviced
  • Optionally can be fitted with mains powered laser line
 
Elumatic TS161 Upstroke Beading Machine
  
Click to Enlarge:
 
       
  • Elumatic TS161 Year 1997
  • Upstroke beading machine for UPVC bead / Ali Bead
  • Re-sharpened 280mm Blade 88T
  • X2 Pneumatic top Clamps
  • 3 Phase power
  • In good working condition
     
 
Jade Engineering Little Gem Beading Machine - Model Gem 80 Print

(Click to Enlarge)

   

  • Bench Mounted
  • Semi-Automatic Operation
  • Currently Fitted with Diamond wheels  and clamping blocks for Synseal Bead (Tooling Can be changed to match other profiles)
  • Three Phase
  • Manfuctured 2004
  • In Fantastic As New condition 
 
Someco Lola Single Head Corner Welder Print

 

(Click to Enlarge)

    

 

  • Single Phase
  • Variable angle corner Welder
  • Manual Clamping Ideal for Curved frames or specials
  • Very solid and simple machine
  • Air supply required

 

 
 
OMS OK330 Double Mitre Saw Print

(Click to Enlarge)

       

 

  

  • OMS OK330 Double Mitre Saw for UPVC or Aluminium (Can add Pneumatic Mist Spray and x2 Pneumatic Front Clamps to the Saw)
  • x2 New 330mm Dia TCT Saw Blades fitted for UPVC or Aluminium
  • 2 Hand Control
  • C.E Marked for health and safety
  • 3 Phase Power
  • In good Condition

  

 Click for Machine Spec

 
 
Wegoma End Miller one Print

(Click to Enlarge)

        

 

  • Wegoma End Miller one  
  • Manual top clamp
  • Corner or 90 degree Milling
  • Very basic machine
  • Three phase power
  • In fair condition
  • Bench Mounted
 
Schuco Punch Tool Print

(Click to Enlarge)

  

 

  • Bench Mounted
  • Pneumatic Operation Via Foot Pedal
  • 4 Different tool Stations
  • Very High Quality tool in great condition  

 

 

 
 
MLA A24 Single Head Copy Router with Espag year 2001 Print

(Click to Enlarge)

 

With:

  • Self-Centring Bars + Paddles
  • NEW Drills for Espag
  • NEW Cutter
  • Three Phase Power 
  • In Very Good Condition
  • fitted with  Mist Spray if doing Aluminium 

 

 
 
Pneumatic Gear Cropper Print

 

 

  • British Made
  • Pneumatic Operation via foot pedal
  • Bench Mounted
  • Re-painted
  • In good Condition 
 
Urban AKS 3710 Transom Welder Print

 

(Click to enlarge)

     

 

Urban AKS 3710 Transom Welder with 0.2mm Close Limiting Knives

 

Corner Welding
Transom Welding
Crucifix Welding
Variable angle corner / transom welding (see Variable Back fence photo)

  • New URBAN Temperature Controller
  • New URBAN Timers
  • New Thermocouple
  • Fully Serviced 
  • Repainted
  • Typical Bullet Proof URBAN Build Quality
  • 2 Hand Control 
  • Low Pressure Clamping
  • Foot Pedal
  • Additional Side Clamp
  • Support Arms
 
Graule ZS170N Print

 

Click to Enlarge

 

Graule ZS170N

  • New Table
  • New Fly Wheel
  • New Clamp Cylinders
  • New Blade
  • Fantastic Condition 
  • Three Phase and Air Required 
 
Pneumatic Crimper Print

 

    

 

(Click to Enlarge)
 
MLA A24 Copy Router With Espag Print

 

(Click to Enlarge)

  

 

MLA A24 Single Head Copy Router 2001

  • Espag Triple Drill Unit
  • Fitted with Drills and Cutters
  • Self Centering Bars
  • x4 Flip Stops
  • Single Phase Power Great if you dont have 3 phase !
  • In Fantastic condition
  • Can Fit Mist Spray for Aluminium 

 
 
MACC K225 Steel Saw Print
(Click to Enlarge)
  • Fitted with New 225 HSS Blade
  • Single Phase
  • Very Good Condition
  • Bench Mounted
  • 2005
 
Pertici BS771 Bead Saw Print

(Click to Enlarge)

   

  

 

Pertici BS771 Auto Bead Saw 2003

  • Machine in Mint Condition
  • Bead Stick Included
  • Pneumatic Clamps
  • 3 Phase Power and Air Required
 
Strifler 3 Head Drainslot Converted to Pneumatic Motors Print

 

Drain Slot

 

 

Strifler 3 Head Drainslot Converted to Pneumatic Motors

  • High Quality pneumatics and high end FRL fitted
  • Fully Rebuilt and Converted to fully Pneumatic
  • 2 Hand Control
  • Low Pressure Clamping
  • Blow gun Fitted
  • In Very Good Condition
  • Fully Serviced and fitted with new Cutters

 
 
More Articles...
Page 1 of 2

Second Hand Machinery And Machine Parts

                                                                     Click For Stayer and OMS Spares

SecondhandOMS OK 330

Infismac Spares for FC/3P, FC1 , FC5 and

COPIA - FC/3F Copy Routers

Please Call for Details 

01264 355369

Contact Us

Antiference Window Systems

Unit 10, Towergate Industrial Park
Colebrook Way
Andover
Hampshire
SP10 3BB
United Kingdom
Tel:   +44 (0)1264 355369
Fax: +44 (0)1264 323827                WhatsApp: 07731 895099

 

Email: sales@antiferencews.com 

 

Art By Pino